Summer Wallet

I needed a new wallet,

 PATTERN: I will be referring to these pieces as A, B, or C
A

 B

 C-
PLEASE NOT IT SHOULD BE CUT 4

MATERIALS NEEDED:
1/2 Yard of material (I used some scraps that I had, preferably two colors)
1/4 Yard medium interface
Pins
Sewing Machine
Iron


DIRECTIONS:
1-Cut out all fabric according to pattern. Iron if needed.

2- Start with Pattern C. Hopefully you cut 4, separate into to piles. With Right sides together sew 3 edges together leaving the bottom open. Right side out and set aside.

3-Take section B, separate into two piles: 1 interface, 2 fabric/pile. Place fabric right sides together, then the interface, pin, sew 3 edges, leaving the bottom open, right side out and set aside.

 4-Take 1 Piece of C and 1 Piece of B, center C on top of B. Sew 3 edges leaving top open, it is ok that the bottom is unfinished.

5-Take the second piece of C and sewing it on the same B piece as the other lining it up with the bottom. Leaving the top open and the raw edges sew together at the bottom.

6-Take Fabric from A, Place in the following order, fabric right side up, interface, fabric right side down to it is like a sandwich with the right side face out. Pin "B" to both sides of "A" as shown below. Sew the bottom and the edges together leaving the middle open. Right side out.

 

 7-If for any reason the you have an unfinished seem in the middle of your wallet tuck your seem inward and make a small stitch.


Congrats you are all finished!